Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Fireplace Repair Across Pembroke Park
Fireplace repair in Pembroke Park usually runs $150 to $1,900 depending on what’s actually wrong. A pilot light fix or damper adjustment sits at the low end, while a flue resurfacing or firebox rebuild lands higher. That’s the straight answer. Most repair calls we handle in Pembroke Park are in older apartment buildings and mobile home parks where the fireplace hasn’t been looked at in years, sometimes decades. If you’re near Southwest 25th Street or off Hallandale Beach Boulevard and smoke is backing into the unit, call us at (754) 354-1451. We’ll send a background-checked tech who gives you a written price before any work starts.
Why Ashby Chimney Fort Lauderdale Is Pembroke Park’s Preferred Fireplace Repair Company
Since 2002, our Fireplace Repair team has worked on the kind of chimneys that dominate Pembroke Park: prefabricated metal flues in duplexes, clay-tile stacks in 1970s apartment complexes, and small wood stoves in mobile home communities. We know these systems. We know what the humidity does to them and we know what a deferred-maintenance flue looks like when a landlord finally calls because a tenant complained about smoke. That local familiarity means we diagnose faster and don’t recommend work that isn’t needed.
Every job gets a written price before we touch anything. Every repair gets a written guarantee. If a covered repair fails inside the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s not an add-on. It’s how Nathan Corliss runs this company. Scheduling and dispatch are coordinated from our South FL office, and crews serve Pembroke Park locally.
When you call, a live person answers. No voicemail loops. No callback forms. You’ll get a real arrival window and a tech in uniform who shows up on time. Pembroke Park property managers and homeowners deal with enough contractors who disappear. We don’t do that.
Styles & brands we work with
Gas Fireplace Maintenance in Pembroke Park
Gas Fireplace Maintenance in Pembroke Park matters more than most people assume, especially in rental units where the fireplace runs on propane or natural gas and hasn’t been serviced since installation. Condensation from South Florida humidity corrodes burner assemblies and thermocouples faster than you’d see in a drier market. Our techs clean the burner, check the pilot assembly, test the thermopile output, inspect the venting for blockage, and confirm the gas valve shuts down correctly. A standard gas fireplace maintenance visit in Pembroke Park typically runs $130 to $220. If we find a failed thermocouple or a corroded burner tube, parts and labor for those repairs usually add $90 to $190.
Pilot light and ignition work
A pilot light that flickers, goes out overnight, or won’t stay lit is often a dirty orifice or a weak thermopile. In Pembroke Park’s humid air, soot and moisture build up on these small gas ports faster than in inland Florida. We clean or replace the pilot assembly, verify millivolt output with a meter, and test the system through three full cycles before we call it done.
Log set, glass, and vent inspection
Over time, gas log sets chip, glass seals wear, and vent terminations get blocked by debris or insects. During a maintenance call we remove and inspect the glass, clean the ceramic logs, and check the direct vent or B-vent for corrosion. Mobile home units with cathedral roof vents are particularly prone to rusted vent caps in this coastal climate.
Wood Stove Installation in Pembroke Park
Wood Stove Installation in Pembroke Park comes up most often in mobile home parks and older single-family lots where residents want a working heat source for the rare cold snap or simply prefer the look of a real fire. A proper installation starts with a liner assessment. We don’t just drop a stove onto an existing flue and walk away. We measure clearances, check floor protection requirements, run a camera through the chimney, and confirm the existing stack can handle the stove’s temperature output. A straightforward wood stove install in Pembroke Park with an existing usable chimney generally runs $800 to $1,900 including the liner connection, stovepipe, and safety clearances verified. If the flue needs a new liner first, that’s additional and we’ll show you the camera footage before quoting it.
Flue liner options for older stacks
Many Pembroke Park homes built before 1980 have clay-tile flues that weren’t designed for modern wood stove temperatures. We typically recommend a DuraFlex stainless liner for these applications. It’s a flexible, continuous tube that gives you a smooth draft and a fire-safe barrier. We stock common sizes so Pembroke Park customers aren’t waiting on a truck from out of state.
Mobile home and prefab chimney work
Mobile home wood stoves require specific clearances and venting components that differ from a site-built house. We install units that meet HUD standards and use listed components from manufacturers like Famco for the roof flashing and termination cap. The South Florida humidity means we pay extra attention to flashing seals and storm collars, because a small roof leak around a chimney in Pembroke Park becomes a mold problem fast.
Trusted Brands We Service in Pembroke Park
We repair and service fireplaces built with components from Gelco, Olympia Chimney, and Copperfield, among others. That matters because off-brand or discontinued parts slow down a repair and sometimes force a full replacement when a proper component would have done the job. We keep common repair parts staged for Pembroke Park’s typical systems: gas valve assemblies, thermocouples, damper hardware, chase covers, and termination caps in standard sizes. That means a faster turnaround for rental turnovers and pre-sale inspections when time is tight. If your fireplace or wood stove uses a brand we don’t stock, we can source the part quickly through our chimney-trade suppliers.
See the difference
Before
After
Before
After
Before
AfterCommon Fireplace Repair Problems We See in Pembroke Park Homes
- Deferred-maintenance flues in rental buildings. Landlords put off fireplace and chimney work until a tenant reports smoke backup or a fire safety inspection demands it. By then, what should have been a $200 sweep has turned into a $1,200 flue resurfacing.
- Sticky creosote from humidity. Pembroke Park’s moist air keeps creosote from hardening into the flaky stuff you see in drier climates. Instead, it stays tacky and collects dust, lint, and insect debris, which restricts airflow and increases draft problems during the brief cool snaps when fireplaces actually get used.
- Rusted dampers and water intrusion. Decorative fireplaces in older duplexes rarely get used, so dampers rust open and chimney crowns crack unnoticed. Water comes in, stains ceilings, and eventually causes spalling on clay-tile liners. We find this constantly on rental turnovers.
- Unlisted metal flues in mobile homes. Many mobile home park units have fireplaces vented through thin, unlisted metal flues that corrode after years of salty, humid air. Once the flue perforates, draft fails and carbon monoxide can enter the living space during operation.
Pricing for Fireplace Repair in Pembroke Park, FL
Here are the numbers we quote most often in Pembroke Park. Damper repair: $140 to $350. Pilot light or thermocouple replacement: $90 to $190. Firebox repair with refractory mortar: $250 to $600. Flue resurfacing with HeatShield: $1,200 to $1,900 depending on footage and access. Wood stove installation with existing chimney: $800 to $1,900. Gas fireplace maintenance: $130 to $220. These ranges reflect typical Pembroke Park housing stock: mid-century low-rise apartments, duplexes, and mobile homes. What changes your number is access, the condition of the existing flue, and whether we’re doing the job at day one or fixing someone else’s failed patch-up. Call (754) 354-1451 for a free estimate and we’ll put your price in writing before any work begins.
We Also Serve Cities Near Pembroke Park
Ashby Chimney Fort Lauderdale handles Fireplace Repair in Pembroke Park and the surrounding area. If you’re in Fort Lauderdale, Hollywood, Pompano Beach, or Aventura, our crews are already working nearby and can schedule you in without a long wait. Same written price, same guarantee, same live-person phone answer.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Fireplace Repair in Pembroke Park
Humidity here keeps creosote sticky and attracts debris, which means flues clog faster even with light use. It also accelerates rust on dampers, gas burner tubes, and unlisted metal flues in mobile homes. In drier parts of Florida, a fireplace that’s used once or twice a year might go a decade between issues. In Pembroke Park, we recommend an inspection at least every two years even for decorative units, because the moisture is doing damage whether the fireplace runs or not. Call (754) 354-1451 to schedule one.
There’s no special Pembroke Park inspection requirement that applies only to fireplaces, but fire safety compliance for rental turnover often triggers a look at the chimney. In practice, many property managers call us when a tenant move-out reveals smoke stains, a stuck damper, or a unit that hasn’t had the flue checked in years. We provide a written report with camera images, which gives the owner documentation for their file and a clear scope of what actually needs fixing versus what can wait. Call (754) 354-1451 for schedule a turnover inspection.
Yes, and we do it regularly. Mobile home fireplaces need components listed for manufactured housing, clearances measured against HUD standards, and venting checked for corrosion from decades of humid air. We work on both wood and gas units in Pembroke Park’s mobile home communities, and we’ll give you a written price before any repair starts. If the flue has perforated, we’ll show you the camera footage and explain your liner options before recommending anything.
Flue resurfacing and damper replacement, usually together. In 1970s-era buildings, the clay-tile liners have spalled from years of humidity cycles, and the dampers have rusted open. A tenant reports smoke or a ceiling stain shows up, and the property manager finally calls us. We scope it with a camera, confirm the damage, and typically repair it with a HeatShield resurfacing rather than a full rebuild. It’s faster, less invasive, and about a third the cost of tearing out the old flue. Call (754) 354-1451 and we’ll give you an exact quote from the camera findings.
Yes, because the problem isn’t how often you use it. It’s what’s happening to the chimney while you’re not using it. Humidity is corroding metal components, keeping creosote tacky, and letting water into cracked crowns. When a rare cold snap hits and you light that first fire of the season, a neglected flue is at its most dangerous: restricted airflow, possible blockages from debris or animals, and a draft that pushes smoke and carbon monoxide back into the room. An inspection catches all of that before you light. Call (754) 354-1451 and we’ll get you scheduled.
If your fireplace in Pembroke Park needs work, or you’re not sure and just want a straight answer, call us at (754) 354-1451. We’ll send someone who knows Pembroke Park’s buildings, gives you a written price up front, stands behind the repair in writing, and shows you the camera footage before recommending anything. That’s how it should work.
Written by Nathan Corliss, Owner at Ashby Chimney Fort Lauderdale, serving Pembroke Park since 2002.