Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Fort Lauderdale?
Chimney cap and crown work in Fort Lauderdale typically runs between $450 and $2,400, with most homeowners paying $900 to $1,600 for a crown repair plus a new stainless cap installed. A simple cap replacement alone usually lands between $450 and $900, while a full crown rebuild with a custom-fabricated cap can push toward $2,400 depending on chimney height, accessibility, and material choice. These are 2026 prices for the Fort Lauderdale market, where salt air and hurricane-season storms make this repair more common than in inland Florida.
If you’re noticing water in the fireplace, crumbling mortar on the crown, or a rusted cap, the sooner you address it the cheaper the fix. Nathan Corliss and the team at Ashby Chimney Fort Lauderdale have been handling these repairs since 2002, and every job gets a written price before work begins.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what you can expect to pay in Fort Lauderdale in 2026, broken down by line item. These ranges reflect what we see across Broward County, from Victoria Park to Coral Ridge to Wilton Manors.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Chimney cap replacement (standard stainless steel) | $450 – $900 | Includes removal of old cap, new cap, and mounting hardware. |
| Chimney cap replacement (copper or custom-fit) | $800 – $1,500 | Copper adds cost but handles salt corrosion better long-term. |
| Crown repair (crack fill, reseal) | $500 – $1,200 | Works when the concrete is mostly intact but cracked or spalled. |
| Crown rebuild (full tear-out and repour) | $1,200 – $2,400 | Needed when the old crown is too far gone to patch. |
| Cap + crown combo (most common package) | $900 – $1,600 | This is what most Fort Lauderdale homes need. |
| Multi-flue cap | $700 – $1,300 | For homes with two or more flues sharing one chimney. |
| Roofline access add-on (steep pitch or high roof) | $150 – $400 | Two-story Fort Lauderdale homes with steep rooflines cost more. |
Drive what drives these numbers? Three things: chimney height and roof pitch, the condition of the existing crown, and material choice. A single-story ranch in Plantation with a gentle roof slope is a straightforward job. A two-story home in Rio Vista with a 12/12 pitch and a chimney that hasn’t seen maintenance in a decade means more labor, more safety rigging, and more material.
Salt air is the quiet multiplier in this market. Stainless steel caps hold up well, but cheap galvanized caps rust through in three to five years a mile or two off the beach. Copper costs more up front but resists the salt corrosion that eats lesser metals. When you call Ashby Chimney Fort Lauderdale, we’ll walk through the trade-offs in plain language so you can pick what makes sense for your house.
What Affects Chimney Cap & Crown Pricing in Fort Lauderdale
- Roof pitch and chimney height. A two-story home in Colee Hammock with a steep roofline costs more than a single-story ranch in Melrose Park. Steeper pitches require more safety gear and slower work.
- Salt exposure. Homes east of US-1 deal with salt air that accelerates rust and crown wear. A home near Las Olas may need a copper cap where a house in Davie would do fine with stainless. Material choice changes the price by $400 to $900.
- Number of flues. One flue is simple. Two or three flues sharing one chase means a wider cap or a custom-fabricated piece, pushing cost toward the top of the range.
- Crown condition. If the concrete crown has surface cracks, we can often patch and reseal. If it’s crumbling in chunks, the full tear-out and repour is the only option that lasts. Cracked crowns that go untreated let water into the brick below, which is how a $300 patch becomes a $2,000 rebuild.
- Access and obstructions. Pool cages are common in Fort Lauderdale and can block ladder access. Trees, tile roofs, and tight lot lines in neighborhoods like Sailboat Bend add labor time. If we need a lift instead of a ladder, add $150 to $400.
- Permit considerations. Most cap and crown work doesn’t require a permit in Fort Lauderdale, but if we find damaged masonry that needs structural repair, we’ll tell you before any work starts and include that cost in your written quote.
The Kingswell Way applies to every quote we write: say the price, show up in the window, leave it cleaner, put the guarantee in writing, come back if it fails. That fifth part matters most on crown work. A crown that gets repoured with the wrong mix or no drip edge will crack again inside two years. We’d rather charge the right price for the right fix than sell you the same repair twice.
How to Save on Chimney Cap & Crown
Saving money on chimney work is less about finding the cheapest bid and more about timing the repair before the damage spreads. Here’s what actually works in Fort Lauderdale:
- Fix the crown early. A cracked crown caught in year one costs $500 to $900 to patch. Wait until water has worked its way into the brick and you’re looking at a full rebuild plus possible masonry repair. Schedule an inspection after hurricane season. October and November are good months to catch storm damage before it compounds.
- Bundle the cap and crown. If both need work, doing them together costs less than two separate visits. One trip, one setup, one written quote. Most Fort Lauderdale homeowners save $100 to $250 by combining.
- Pick the right metal for your microclimate. If you’re east of Federal Highway, copper’s higher sticker price often beats buying two stainless caps over the same 15-year span. If you’re further west, standard stainless is fine. We’ll tell you what actually makes sense for your zip code, not what earns us the most margin.
- Get a written estimate before you decide. Ashby Chimney Fort Lauderdale gives you a written price before any work starts. That means no “surprise fees” at the door and no price that somehow doubles between the quote and the invoice. You can call (754) 354-1451 for a free estimate and know exactly what you’re deciding on.
We also run a Chimney Cap & Crown service in Fort Lauderdale that covers the full scope of this work. If you bought your home within the last few years and have never looked at the chimney crown, that page walks through what we check and why it matters down here.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Fort Lauderdale?
A chimney cap in Fort Lauderdale runs $450 to $900 for a standard stainless steel replacement, installed. Copper caps range from $800 to $1,500. The material difference matters near the beach, where salt air shortens the life of cheaper metals. Call (754) 354-1451 and we’ll give you a written price for your specific chimney before any work starts.
Is it cheaper to repair or replace a chimney crown?
Repairing a crown costs $500 to $1,200 and is cheaper when the concrete is mostly intact with surface cracks or minor spalling. Replacing a full crown runs $1,200 to $2,400 and is the right call when the crown is crumbling, has large missing chunks, or has been patched repeatedly. A patch on a failed crown is money wasted. Nathan Corliss will tell you straight which side of that line your chimney sits on.
Can you come today to inspect my chimney cap and crown?
We answer our phones with a live person 24/7, so yes, you can call (754) 354-1451 right now and book the soonest open window. In many parts of Fort Lauderdale we can be out the same day or next day, especially if you’re seeing active water intrusion. Every visit includes a written price before work begins.
Why do chimney crowns fail so fast in Fort Lauderdale?
Crowns fail fast in Fort Lauderdale because of the combination of intense sun, salt air, and hurricane-season downpours. Concrete expands and contracts with heat, salt accelerates surface breakdown, and standing water after heavy rain finds every micro-crack. A crown poured with the wrong mix, or missing a proper drip edge, can crack within two years. We see failed crowns within five years of installation regularly across the city. The fix is a properly mixed crown with a drip edge that sheds water away from the brick, plus a correctly sized cap to close the top.
Do I need a new chimney cap if my crown is cracked?
Not automatically. A cracked crown and a damaged cap are separate problems, though water damage often takes out both. If your cap is rusted, missing, or pulling loose, it’s worth replacing alongside the crown repair, which is why combo jobs save money. If the cap is still sound, we’ll tell you that too. Our job is to fix what’s broken, not sell you parts you don’t need.
Do chimney cap and crown repairs come with a guarantee?
Yes. Every repair Ashby Chimney Fort Lauderdale completes receives a written guarantee. If a covered repair fails within the guarantee period, we return and correct it at no charge, no debate. It’s the 365-Day Done Right Promise and it’s not an add-on; it’s included with every job we write up.
What the Trade Actually Does on Your Chimney
When we talk about a chimney crown, we’re talking about the concrete or mortar slab that sits on top of the brick, sealing the gap between the flue and the outer edge. Its job is simple: shed water off the chimney. When it cracks, water gets into the brick, into your attic, and into your fireplace. The chimney cap sits above the flue opening and stops rain from falling straight down the hole, while also keeping birds, squirrels, and debris out.
Water is the enemy. In Fort Lauderdale we get 60-plus inches of rain a year and that’s before hurricane season stacks a few tropical deluges on top. A missing cap or a cracked crown is a slow leak into the most expensive part of your house to repair. The good news is the fix is straightforward and the pricing is predictable. Most of the time we’re in and out in one visit.
Materials and Workmanship Standards
Ashby Chimney Fort Lauderdale sources chimney components from recognized trade suppliers, including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. That matters because chimney work is full of bargain parts that fail early. A cap from a big-box store might save $50 and rust in 18 months. We’d rather install something that outlives the mortgage.
Crown work is poured with a proper slope and drip edge so water moves away from the brick, which is exactly what most failed Fort Lauderdale crowns are missing. The same materials and methods have kept our work holding up through storm seasons since 2002.
What a Chimney Cap & Crown Visit Looks Like
Here’s how it goes when you call (754) 354-1451. You speak with a live person. We schedule a window and show up in it. A uniformed, background-checked technician does a visual assessment, takes photos, and walks you through what’s actually going on up there. Then you get a written price. If you approve, the work happens, the area is left cleaner than we found it, and the written guarantee follows. If the repair fails within the guarantee period, we come back free. That’s the five-step Kingswell Way, and it’s printed on every quote.
The part people notice most is the pricing. No vague verbal ranges, no “we’ll see when we get up there.” The number we quote at the door is the number on the invoice. We’ve been doing it that way since 2002, and it’s why homeowners who’ve been burned by price-switching contractors tend to call us back.
Key Takeaways
- Chimney cap and crown work in Fort Lauderdale runs $450 to $2,400 in 2026; the most common job lands between $900 and $1,600.
- A cap-only replacement typically costs $450 to $900 for stainless steel, or $800 to $1,500 for copper.
- Crown repair averages $500 to $1,200, while a full crown rebuild runs $1,200 to $2,400.
- Salt air near the beach, roof pitch, chimney height, and number of flues all shift the price.
- Free written estimates are available by calling (754) 354-1451. Every repair carries a written guarantee.
Written by Nathan Corliss, Owner at Ashby Chimney Fort Lauderdale, serving Fort Lauderdale since 2002.
Pricing reflects the Fort Lauderdale market as of 2026. Ashby Chimney Fort Lauderdale offers free estimates – call (754) 354-1451.
What Our Customers Say
"Annual cleaning. Drop cloth down, vacuum running, hearth spotless after. No pressure to buy a cap or anything extra. Just did what I booked and charged the quote."
- Keith Donovan"No upsell nonsense. I expected him to tell me I needed a thousand dollars of work. He said the firebox was fine, swept it, and charged me the quote. That kind of honesty gets my repeat business."
- Steve Karras"Had them out for the yearly sweep before we start burning. He put down a drop cloth, swept it clean, and actually showed me the inside of the flue on a little camera. No mess, no surprises on the bill."
- Bill Prentice