Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Copperfield Chimney Sweep in Fort Lauderdale: What to Know First
We provide independent Copperfield chimney sweep and inspection in Fort Lauderdale, and most jobs are completed the same day. A standard Copperfield sweep and Level 1 inspection in our market typically runs $189 to $289. You’ll get a written price before we touch a single tool, and the number on the invoice matches the number we quoted at the door.
This page is for Copperfield owners in Fort Lauderdale who want to know what their fireplace actually needs, what it should cost, and whether the company showing up will stand behind the work. Nathan Corliss and our crew have been cleaning and inspecting chimneys for going on two decades, and we’ve worked on Copperfield units from the Las Olas Boulevard corridor to the barrier island neighborhoods. If you’d rather just talk it through, call (754) 354-1451 and a live person answers, day or night.
How Copperfield Products Fail – and How We Fix Them
Copperfield makes a solid chimney system, but South Florida humidity and salt air create failure patterns we see on repeat. Here’s what actually shows up on Copperfield units in Fort Lauderdale:
- Moisture intrusion at the chase top on Copperfield factory-built chimneys. The galvanized chase covers on older Copperfield installations corrode faster in Fort Lauderdale’s salt-laden air than the flue pipe itself does. Water gets in, mixes with soot, and creates an acidic slurry that eats at the flue liner. We see this on the Copperfield Traditional and Deluxe series more than any other issue. Our fix is a chase cover inspection on every sweep, with replacement using powder-coated stainless when the original has rusted through.
- Cracked refractory panels on Copperfield wood-burning zero-clearance models. Fort Lauderdale homes don’t run fireplaces through long winters, but the start-stop cycling when owners do light them creates thermal shock that hairline-cracks the refractory panels. Left alone, those cracks let heat reach the metal firebox walls. We check panel condition on every Copperfield sweep and document it with photos you keep.
- Creosote adhesion in Copperfield stainless liners at coastal elevations. The humidity here keeps creosote slightly tacky long after a fire goes out. On Copperfield’s stainless flue systems, that tacky layer grabs soot faster than it does in drier climates, which is why an annual sweep matters more in Fort Lauderdale than it might in Denver. We remove it with rotary brushes sized to the exact Copperfield liner diameter, not a one-size-fits-all cable whip.
- Damper warping on Copperfield Decorative series fireplaces. The cast-iron dampers on some Copperfield Decorative units warp when owners burn the wrong materials, usually treated scrap wood or fire logs that burn hotter than seasoned firewood. A warped damper won’t seal, which means humid outside air pouring down the flue all summer and that musty fireplace smell. We straighten what’s salvageable and replace what isn’t, always showing you the before and after.
- Chase pan leak causing ceiling stains above Copperfield built-in units. When a Fort Lauderdale homeowner calls us about water stains on the ceiling above a Copperfield fireplace, the flue is rarely the source. It’s almost always the chase pan flashing failing at the corners. We trace it with a moisture meter and document what we find before recommending any repair, so you’re never paying for a liner you didn’t need.
One detail you won’t find on Copperfield’s own site: that chase pan on Copperfield factory-built units has no weep holes from the factory. Water has nowhere to drain, so it sits and rusts from the inside. We drill drainage into the replacement pan when we install one, which is a small change that doubles how long the new one lasts in Fort Lauderdale’s climate.
Styles & brands we work with





Our Copperfield Chimney Sweep Process
Here’s how a Copperfield job runs from the first call to the final handshake:
- 1
You call, a person answers. We schedule a real arrival window and confirm it in writing. No voicemail loops, no “we’ll get back to you.”
- 2
We inspect before we quote. We camera-scan the Copperfield flue and document the condition of the liner, damper, refractory panels, and chase top. You see the photos.
- 3
Written price first. We hand you the exact scope and dollar amount before any work starts. If we find something concerning on camera, we show you and let you decide.
- 4
We sweep the way Copperfield spec’d it. Rotary brushes sized to the liner diameter, not the diameter of what’s already on the truck. Every Copperfield flue gets vacuumed with a HEPA-filtered unit running the whole time, and drop cloths go down before the ladder even comes off the van.
- 5
We test and verify. After the sweep, the camera goes back in. You see the difference. Photos go in the report with our written recommendation for when you’ll need us again.
- 6
We leave it cleaner than we found it, and we put the guarantee in writing. Every sweep report includes our written guarantee and the date window on the 365-Day Done Right Promise: if it’s not done right, we make it right. No charge.
See the difference
Before
After
Before
After
Before
AfterWhat Copperfield Chimney Sweep Costs in Fort Lauderdale
Straight numbers, because that’s how Nathan runs this crew:
| Service | Typical Cost in Fort Lauderdale |
|---|---|
| Copperfield sweep + Level 1 inspection | $189 – $289 |
| Copperfield sweep + Level 2 camera inspection | $289 – $389 |
| Chase pan replacement (powder-coated stainless) | $450 – $750 depending on size |
| Refractory panel replacement (per panel) | $325 – $525 installed |
| Damper replacement on Copperfield Decorative units | $275 – $425 installed |
What moves the price is access, liner condition, and whether we’re chasing a problem already in motion. A straight sweep on a well-maintained Copperfield flue sits at the low end. A chase pan replacement at a three-story Fort Lauderdale home with a steep pitch sits higher. Every quote is flat and written before work starts. Call (754) 354-1451 for a free estimate, and we’ll price it over the phone or schedule a visit.
Why Fort Lauderdale Homeowners Call Ashby Chimney Fort Lauderdale for Copperfield Work
Say the price first, explain the work second, put it all in writing – that is the whole business model. Nathan built this crew on that, and it’s why our Copperfield customers in Fort Lauderdale don’t flinch when they see the invoice. They saw the number at the door.
We’ve operated since 2002 as part of the Kingswell network of independently owned chimney companies, which means we carry the Kingswell Guarantee on every job: written price before work starts, written guarantee on completion, and a free second visit if a covered repair fails inside the guarantee period. Our technicians are background-checked and uniformed, so you know exactly who’s stepping into your home. When a Copperfield part is the right call, we use it. When a comparable aftermarket part from DuraFlex, HeatShield, or Gelco does the job better for less, we tell you that too and price both options in writing.
FAQs
Once a year, even if you only burn a handful of fires, because Fort Lauderdale’s humidity keeps creosote tacky and accelerates buildup on Copperfield stainless liners. An annual sweep costs $189 to $289 and gives us a reason to check the chase pan and refractory panels before they become a repair. Call (754) 354-1451 and we’ll get you on the schedule.
No. A professional sweep and inspection performed by an independent Copperfield service provider is standard maintenance, and skipping it is what actually causes warranty claims to be denied. We document every sweep with camera photos and a written report you can file with your warranty paperwork.
When the part is flue-critical, yes. When a Copperfield part is backordered or priced far above a comparable aftermarket component from DuraFlex or HeatShield, we show you both options with honest numbers and let you choose. We will not mark up parts to pad the job, and the price you see is the price we charge.
Most sweeps and inspections in Fort Lauderdale are scheduled within the week, and a live person answers the phone 24/7 to book it. If you’re calling because water is coming down the chimney during a summer storm, we’ll work you in faster.
In the short term, you burn with less draft and more smoke in the room. Over time, the creosote layer thickens and becomes a chimney fire risk, and the moisture it traps accelerates rust on the damper and chase pan. We’d rather catch it at the $189 sweep stage than the $750 chase pan stage. Call (754) 354-1451 for a free estimate and we’ll tell you honestly what your Copperfield flue needs, even if the answer is “nothing yet.”
Written by Nathan Corliss, Owner, Ashby Chimney Fort Lauderdale at Ashby Chimney Fort Lauderdale, serving Fort Lauderdale and nearby areas.